Sheet Metal Tool Replacement macro?

[phi]

Hi all,

I want our countersink stamp tools to show up on our flats with different hole sizes.

For example: in 12 Ga steel (2.667 mm), a #10 countersink stamp has a top OD of 10.30 mm and a bottom OD of 5.68 mm (actual hole dimensions). The tool we use in sheet metal has a top OD of 10.00 mm and a bottom OD of 7.98 mm, so we'd like the flat to show the hole this way.

In our drawing views, top/front/bottom/isometric we want the countersink to show 10.30mm/5.63mm. On the flat, we want the holes to show 10.0mm/7.98mm.

I understand I can use replacement macros for this.

I turn on the replacement feature with this code in my sheet metal shop file (ie, demoshop.lsp)

(sha-enable-replacements)
(sha-enable-stamp-replacement)

I then include a ": REPLACEMENT-INFO" line below my countersink stamps, like so:

: REPLACEMENT-INFO ("sha_replace_my_stamp {1} {2}" : HOLE_DIA : OUT_DIA)

I now need to write the macro "sha_replace_my_stamp" and save it in \personality\SheetAdvisor\replacement_fncs.

What language are these macros written in? Can anyone help me generate some simple code to replace the stamp in the flat?

P