|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
#1
|
||||
|
||||
So long, and thanks for all the seafood .-)
Hi all,
over the past few months, I've been on a forum diet. The reason is that I have a new role at PTC and don't work on CoCreate products any longer. Initially, I had hoped that I'd be able to continue frequenting the user forums, but it turns out that the new job requires all my attention and time. Now, I may still stop by every now and then, of course. Also, I will continue to blog, in decidedly unreliable fashion, at http://www.clausbrod.de/Blog. Nevertheless, this is probably the right time to "officially" say goodbye and thank everyone in the forum for more than a decade of fruitful discussions and lively exchange. This kind of direct customer contact was always near and dear to me, and I'll be missing it. Thanks again for everything, and continue to have fun and success with CoCreate products! Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
#2
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Well Claus,
have a good and pleasant trip into your new future Too bad you probably can't sniff around everyonceinawhile Seafood ? I thought it had been Fish |
#3
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Sorry to see you go Claus, you will be missed. Over the years you were one our most active and valuable members and answered some of the toughest questions. I was always impressed by the extent of your knowledge and the amount of time and effort you were willing to expend to try to help someone solve a problem. Your assistance with the moderation and adminstration of this forum was very helpful. Best of luck with the new position at PTC.
__________________
John Scheffel |
#4
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Claus,
I've only been here a short time. Your input in the last year has been a life saver for me and others using CoCreate. As a CoCreate customer, I would say you earned the "Satisfied the Customer" award for going further with the technical support, explaining it in detail and providing other CoCreate methods and options that were not though of before hand, but every needs. You will be greatly missed by all here and in the other CoCreate realms. Take care.
__________________
Support Your Local Sheriff - At high noon Jason: "How much does it pay?" Citizen: "Well, none of our other sheriffs ever lived long enough to find out." Co-Create 2007 (15.50G) ANSYS Workbench 14 SolidWorks 2011 UGNX-7.5 / TeamCenter UA 8 PADS 2000 Applicon Bravo Autotrol CADAM Pro/E |
#5
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Pity that we cannot see you here.
But good luck with your new assignment! Tell us when you accomplished great job there! Best regards.
__________________
Toshi |
#6
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Claus
Good luck on your new endeavor and remember the most famous words regarding the title of your thread. "Don't Panic." -Douglas Adams Tom
__________________
Tom Kirkman Creo Elements/Direct 20.1 Dell Precision 3581 https://www.o-i.com |
#7
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Way back when, I used up all my fish karma in that thread. Thanks a lot to everybody for the kind words, and all the best! Claus
__________________
CoCreate Modeling FAQ: http://www.clausbrod.de/CoCreateModeling/ |
#8
|
|||
|
|||
Re: So long, and thanks for all the seafood .-)
Thanks for all your support through all the years, you helped to many CoCreate users with long advices. All the success in the new position.
Mehmet Akyar http://www.mip-group.com |
#9
|
|||
|
|||
Re: So long, and thanks for all the seafood .-)
Best of luck, Claus! You've certainly been one of the most helpful people on this board -- your deep knowledge and willingness to share it helped many many folks...
You definitely will be missed!
__________________
Andy Poulsen AI MAXTools: Dream. Design. Done. It's that easy! Add-ins bringing new functionality and speed to Creo Elements/Direct and CoCreate products. Now available for v17-v20+! See them in action at www.ai-maxtools.com and then try them for yourself -- FREE! |
#10
|
||||
|
||||
Re: So long, and thanks for all the seafood .-)
Hi Claus,
Me too hate to see you leaving, but many thanks and good luck in your next job. Cheers John
__________________
High performance CAD workstations Please visit us at https://www.cadware.nl |
#11
|
|||
|
|||
Re: So long, and thanks for all the seafood .-)
Many thanks Claus,
for all the contributions you bring to the CoCreate community. Everybody, soon or later, took advantages of your expertise so kindly published by you. So lucky will be the community you're looking forward now! I wish you all the best for your next future Bye |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|