Error conversion Mi to Dwg

[Maximus172]

Hi,

I have a macro doing conversion from Mi to Dwg.
It's running, but sometimes, there is an error message ("consersion problem... see log file") and the macro stop.

Is it possible to disable this error message, ? Is it possible that the macro continuous the conversion?

Thanks

[Shaba]

Can you post a log file?

[Maximus172]

MI to DWG translation log file
CoCreate DXF/DWG Translator Release 17.0 (build 789.24)
dxfdwg
-------------------------------------------------------
SourceDirPath ./
DestinDirPath ./
KanjiTranslate OFF
EnableLegacyEncoding OFF
RecordByLayerInfo OFF
CustomUnits ON
Units mm
UnitsScale 1
ConvertMIDimensionsToGeometry OFF
ExplodeDXFDimensions OFF
KeepAttributesWithPart OFF
StartSection DXF to MI Translator
InternalHandseed
PolymarkerType 2
OutputACADVersion AC1018
DXFDecimalPrecision 14
ReadAllLayoutData OFF
TranslatePaperspace OFF
LayoutName
TranslateDXFPenLineSize 3
TranslateInvisibleLayers ON
TranslateDXFInvisibleEntities OFF
TranslateMIInvisibleEntities OFF
TranslateSubfixDimProp ON
TranslateSuperfixDimProp ON
ContourSnapGap 1e-012
HatchCloseContours ON
KeepTopScale OFF
TranslateMIPenLineSize 1
HighSplinePrecision OFF
HatchToContours OFF
CreateSplineFitPoints ON
SplineControlPointTranslation OFF
SVGDarkBackground ON
MinimumHatchSpacingDensity 0
FontFilesPath ./
FontMapACADtoMI "ARIAL.TTF" "arial" "hp_kanj2_c" 1.2 1.666
FontMapACADtoMI "ARIALBD.TTF" "arial" "osd_default" 1.2 1.666
FontMapACADtoMI "ARIALUNI.TTF" "arial_unicode_ms" "arial_unicode_ms" 1.2 1.666
FontMapACADtoMI "complex.shx" "hp_block_v" "hp_kanj2_c" 0.95 1.666
FontMapACADtoMI "COUR.TTF" "courier_new" "hp_kanj2_c" 0.75 1.666
FontMapACADtoMI "italic.shx" "hp_jasc_v" "hp_kanj2_c" 1.15 1.666
FontMapACADtoMI "simplex.shx" "osd_default3" "osd_default3" 0.95 1.666
FontMapACADtoMI "tahoma.ttf" "tahoma" "hp_kanj2_c" 1.25 1.666
FontMapACADtoMI "TIMES.TTF" "times_new_roman" "hp_kanj2_c" 1.03 1.666
FontMapACADtoMI "txt.shx" "osd_default" "osd_default" 0.9 1.666
FontMapMItoACAD "arial" "ARIAL.TTF" 1.2 "" 0
FontMapMItoACAD "arial_unicode_ms" "ARIALUNI.TTF" 1.2 "" 0
FontMapMItoACAD "courier_new" "COUR.TTF" 0.75 "" 0
FontMapMItoACAD "hp_block_c" "complex.shx" 1.39 "" 0
FontMapMItoACAD "hp_block_v" "complex.shx" 0.95 "" 0
FontMapMItoACAD "hp_d17_c" "simplex.shx" 1.24 "" 0
FontMapMItoACAD "hp_d17_v" "simplex.shx" 0.95 "" 0
FontMapMItoACAD "hp_i3098_c" "txt.shx" 1.07 "" 0
FontMapMItoACAD "hp_i3098_v" "txt.shx" 0.9 "" 0
FontMapMItoACAD "hp_jasc_c" "italic.shx" 1.24 "" 0
FontMapMItoACAD "hp_jasc_v" "italic.shx" 1.15 "" 0
FontMapMItoACAD "isocp" "isocp___.ttf" 0.77 "" 0
FontMapMItoACAD "osd_default" "txt.shx" 0.9 "" 0
FontMapMItoACAD "osd_default2" "txt.shx" 1.07 "" 0
FontMapMItoACAD "osd_default3" "simplex.shx" 0.95 "" 0
FontMapMItoACAD "tahoma" "tahoma.ttf" 1.25 "" 0
FontMapMItoACAD "times_new_roman" "TIMES.TTF" 1.03 "" 0
FontMapMI2toACAD "hp_kanj2_c" "msmincho.ttc" 0.89 "MS Mincho" 32785
FontMapMI2toACAD "hp_kanji_c" "msmincho.ttc" 0.89 "MS Mincho" 32785
ArrowMapACADtoMI " " Arrow 1 ON
ArrowMapACADtoMI "_ARCHTICK" Slash 1 OFF
ArrowMapACADtoMI "_BOXBLANK" Arrow 1 OFF
ArrowMapACADtoMI "_BOXFILLED" Arrow 1 ON
ArrowMapACADtoMI "_CLOSED" Arrow 1 OFF
ArrowMapACADtoMI "_CLOSEDBLANK" Arrow 1 OFF
ArrowMapACADtoMI "_DATUMBLANK" Triangle 1 OFF
ArrowMapACADtoMI "_DATUMFILLED" Triangle 1 ON
ArrowMapACADtoMI "_DOT" Dot 1 ON
ArrowMapACADtoMI "_DOTBLANK" Dot 1 OFF
ArrowMapACADtoMI "_DOTSMALL" Dot 0.5 ON
ArrowMapACADtoMI "_INTEGRAL" Slash 1 ON
ArrowMapACADtoMI "_NONE" NoArrow 1 ON
ArrowMapACADtoMI "_OBLIQUE" Slash 1 OFF
ArrowMapACADtoMI "_OPEN" Jis 1 ON
ArrowMapACADtoMI "_OPEN30" Jis 1 OFF
ArrowMapACADtoMI "_OPEN90" Jis 1 ON
ArrowMapACADtoMI "_ORIGIN" Dot 1 OFF
ArrowMapMItoACAD NoArrow OFF "_NONE" 1
ArrowMapMItoACAD NoArrow ON "_NONE" 1
ArrowMapMItoACAD Arrow OFF "_CLOSED" 1
ArrowMapMItoACAD Arrow ON " " 1
ArrowMapMItoACAD Dot OFF "_ORIGIN" 1
ArrowMapMItoACAD Dot ON "_DOT" 1
ArrowMapMItoACAD Slash OFF "_OBLIQUE" 1
ArrowMapMItoACAD Slash ON "_OBLIQUE" 1
ArrowMapMItoACAD Triangle OFF "_DATUMBLANK" 1
ArrowMapMItoACAD Triangle ON "_DATUMFILLED" 1
ArrowMapMItoACAD Jis OFF "_OPEN30" 1
ArrowMapMItoACAD Jis ON "_OPEN30" 1
LinetypeMapACADtoMI "CENTER_DASH_DASH" CenterDashDash
LinetypeMapACADtoMI "CONTINUOUS" Solid
LinetypeMapACADtoMI "DASHED" Dashed
LinetypeMapACADtoMI "DASH_CENTER" DashCenter
LinetypeMapACADtoMI "DOTTED" Dotted
LinetypeMapACADtoMI "DOT_CENTER" DotCenter
LinetypeMapACADtoMI "LONG_DASHED" LongDashed
LinetypeMapACADtoMI "PHANTOM" Phantom
-------------------------------------------------
Warning: Arc 13411 (Center point was adjusted to fit the boundaries)
Warning: Arc 13412 (Center point was adjusted to fit the boundaries)
Warning: Arc 13413 (Center point was adjusted to fit the boundaries)
Warning: Arc 13414 (Center point was adjusted to fit the boundaries)
Warning: Arc 13415 (Center point was adjusted to fit the boundaries)
Warning: Arc 13416 (Center point was adjusted to fit the boundaries)
Some problems encountered during translation.

Thanks for your help

[ldavis@tensorengr.co]

Try TRAP_ERROR and CHECK_ERROR.
TRAP_ERROR will trap a system error which otherwise would cause a program termination.
CHECK_ERROR kicks out a 0 = no error OR 1 = error. Calling CHECK_ERROR resets the TRAP_ERROR toggle back to 0.

If you don't care an error occured just call on CHECK_ERROR to reset the toggle or assign CHECK_ERROR to variable or use it in a conditional statement to check and see if an error occured and give feedback.

A quick and dirty example:

DEFINE Something
TRAP_ERROR

< do something >

{ use this when you don't care if an error }
{ occured and you just want to continue }
CHECK_ERROR
or
{ assign to a variable }
LET A (CHECK_ERROR)
or
{ use when you care an error occured and }
{ you want to do something else }
IF (CHECK_ERROR = 1)
DISPLAY 'ERROR OCCURED'
ELSE { if check_error produce a 0 code }
DISPLAY 'NO ERROR OCCURED'
END_IF

END_DEFINE

Hope this helps.

[Maximus172]

Thanks for your help. It's ok.
No more error during conversion.