|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
#1
|
|||
|
|||
Moving MSU from COM1 to Com4(USB) failed; License not detected
Please help us with the following:
One Space Designer Drafting 2006 worked ok when MSU on COM1, But we have a drawingboard III we want to use on COM1, so We have to connect the MSU to USB with a Sitecom Serial-to-USB cable. When we do that we started the configure license server, but it does not recognize COM4 License program start: Programma’s ŕ Cocreate ŕ License server ŕ Configure license server Server hardware ID 0x0004xxxx7 ok Lan:0 Intel®PRO/100 VE Network connection Used hardware ID MSUxxxxxx Server License Configuration: C:\Program Files\CoCreate\MEls\MEls.conf How to configure MSU on COM4(USB)? |
#2
|
|||
|
|||
Re: Moving MSU from COM1 to Com4(USB) failed; License not detected
Solved the problem in another way:
Installed a Sweex PCI 2 serial port Card, put the MSU on COM3 of this new card and put Calcomp drawingboard III on COM 1. Started program CoCreate license server -> configure license server and MSU was detected. Changed Designer Drafting command: "C:\Program Files\CoCreate\OSD_Drafting_2006\me10.exe" -pelook 1OSD_Drafting_2006\me10.exe" -pelook 1 -locatorport "com1" -locatordriver "wintab" and all was working again. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|