#1
|
|||
|
|||
selection box
Has anyone else had this issue?
For some reason I'm not getting a selection box showing up when I try to click/drag to select multiple lines/parts/whatevers so I just have to draw a blind square and hope I got the whole thing... |
#2
|
|||
|
|||
Re: selection box
Still trying to figure this out. Its kind of hindering me from getting things done
|
#3
|
||||
|
||||
Re: selection box
Do you click on the NW pointing black arrow thingy first and then the box called START?
__________________
Support Your Local Sheriff - At high noon Jason: "How much does it pay?" Citizen: "Well, none of our other sheriffs ever lived long enough to find out." Co-Create 2007 (15.50G) ANSYS Workbench 14 SolidWorks 2011 UGNX-7.5 / TeamCenter UA 8 PADS 2000 Applicon Bravo Autotrol CADAM Pro/E |
#4
|
|||
|
|||
Re: selection box
yeah, I just tried that (hadn't before) , seems to do the same thing as before, things get selected, but the selection window/box doesn't show up. I was having the same problem in Google Sketchup and turning off graphics acceleration fixed it... no such luck with cocreate
by the way, the only NW pointing arrow I have is a yellow one that looks like its pointing at a cluster of stars or something |
#5
|
|||
|
|||
Re: selection box
I tried this on my home computer and noticed something else. Here at work (on my laptop) in addition to the selection box not showing up, neither does the crosshairs on the mouse cursor... I feel like that should just be a setting or something, but can't figure it out...
|
#6
|
|||
|
|||
Re: selection box
It is not a setting, probably a graphics card or driver issue.
What card and what driver do you have? |
#7
|
|||
|
|||
Re: selection box
Quote:
my graphics "card" is labeled as Mobile Intel 945 Express Chipset Family, the current driver is the most recent one Intel has for this computer. I also have problems when I try to "enhance realism" with the mirrored floor/grid thing. Parts start disappearing when I mouseover them, so I'm assuming this and my other problem are probably both related to the graphics card... its too bad though, because overall, my computer (its like a 4 year old laptop) runs cocreate surprisingly well. The company that I work for has said that they're planning to order a desktop computer and the paid edition of cocreate (when, however, is another question) so hopefully that should straighten everything out once I'm on the new computer. Thanks for the help guys |
#8
|
|||
|
|||
Re: selection box
so , for whatever reason, when I opened cocreate today, the selection box and crosshairs were there...
weird |
#9
|
||||
|
||||
Re: selection box
Are you by any chance using a 3d mouse or similar device? We have had this issue, and resolved it by re-zeroing the device.
Tom
__________________
Tom Kirkman Creo Elements/Direct 20.1 Dell Precision 3581 https://www.o-i.com |
#10
|
|||
|
|||
Re: selection box
actually yes, I'm using a spacenavigator... maybe that was it. I never re-zeroed it (on purpose at least(?) ) but I did bring it home for the weekend and re-plug it in when I got to work monday... hmm
|
#11
|
||||
|
||||
Re: selection box
That would re-zero it.
This problem drove us crazy with one of our users. We finally decided to unplug the navigator and the problem went away. A few days later, the problem cropped up again this time we re-zeroed the navigator and never had the issue again. Tom
__________________
Tom Kirkman Creo Elements/Direct 20.1 Dell Precision 3581 https://www.o-i.com |
#12
|
|||
|
|||
Re: selection box
very strange... I would have thought it could have something to do with the fact that if you move it even slightly it shuts the crosshairs off and goes into rotate mode, but I think there are other things you can't do while you're in that mode that would have proved to be more problematic than just the absence of the crosshairs.
whatever the case, thanks for that Tom, at least now I know how to fix it next time if it happens again probably |
#13
|
||||
|
||||
Re: selection box
Oh, those SpaceBall/Navigator issues.
Mine is a Spaceball 4000FLX. It does strange things in CoCreate, but it sure beats leaning forward and holding down the CTRL key and clicking the mouse. LOL
__________________
Support Your Local Sheriff - At high noon Jason: "How much does it pay?" Citizen: "Well, none of our other sheriffs ever lived long enough to find out." Co-Create 2007 (15.50G) ANSYS Workbench 14 SolidWorks 2011 UGNX-7.5 / TeamCenter UA 8 PADS 2000 Applicon Bravo Autotrol CADAM Pro/E |
#14
|
|||
|
|||
Re: selection box
I am also searching for a solution to this problem, i found your post when i was searching for it.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|