CoCreate User Forum

CoCreate User Forum (https://www.cocreateusers.org/forum/index.php)
-   Customization (https://www.cocreateusers.org/forum/forumdisplay.php?f=12)
-   -   World coordinate (https://www.cocreateusers.org/forum/showthread.php?t=8256)

kting 11-19-2016 05:34 AM

World coordinate
 
I draw two construction point on the WP. and then move one point to the other point position.The whole process recorded by loading recorder.Show the code as below:

-------------------------------------------------------------------
;%RECORDING-BEGIN at 11:20:59 11/17/2016
;%SD-VERSION: SolidDesigner 13.01 05-Feb-2005
;! Note, the contents of this file may not be supported by future versions of the application.
preselect
C_POINT
(gpntwc -1.631800 59.495359 2.262562 "vport1")
(gpntwc 10.670876 64.303302 2.262562 "vport1")
complete
preselect
MOVE_2D :select
(gpntwc -6.298333 62.747791 2.262562 "vport1")
(gpntwc 2.751912 54.121777 2.262562 "vport1")
:DIRECTION
(gpntwc -1.631800 60.343820 2.262562 "vport1")
(gpntwc 11.236516 64.161892 2.262562 "vport1")
complete
preselect
;%RECORDING-END at 11:22:05 11/17/2016

-----------------------------------------------------

I found that the point world coordinate not the same.
Is the world coordinate (gpntwc) dynamic or static in the viewport?


All times are GMT -8. The time now is 05:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.