CoCreate User Forum

CoCreate User Forum (https://www.cocreateusers.org/forum/index.php)
-   Macro (https://www.cocreateusers.org/forum/forumdisplay.php?f=52)
-   -   IGES translation (https://www.cocreateusers.org/forum/showthread.php?t=2659)

Hdtoyo 10-14-2002 05:14 PM

IGES translation
 
I work with the software ME10 rev10 (under windows NT 4 )and I would like to translate the MI file to IGES file. I use a macro for this. In fact, The translation seems to be OK but when I try to open the IGES file with the software called PATRAN (under Windows) I have the following error message: "The specified file \file_name.igs is not a valid fixed (80 character) line length ASCII format IGES file." May anyone see this before? And have a solution? Thanks in advance. Hdtoyo

John Scheffel 10-16-2002 05:11 AM

re: IGES translation
 
You might check the IGESo.con file in the iges2d folder. It is a text file that is used to configure IGES output. Look for the "File Output format" line and change it from IGES to DOS. See it that helps.


All times are GMT -8. The time now is 02:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.