PDA

View Full Version : Edit symbol : "next" button (Done)


koninkske
10-06-2008, 11:04 PM
Example : you have a drawing with 30 parts all connected to a "balloon" mentioning the partnumber. The company has created those symbols to be added easy.

Then following case happens : nr 15 is wrong indicated and is not relevant. So what happens is that i need to change nr 16-30 => nr 15-29
(or change the position of the other balloons en reflines but in my opinion that is even more work.....)

Problem : this has to happen by "Edit symbol" and (in this example) i have to recall that menu 15 times cause there is no "next" symbol.........

So i ask a "next" button. Also because this is a problem which is common. The company doesn't use the bom features of OSD so that is no option here.

Wolfgang
10-07-2008, 11:25 AM
.... this has to happen by "Edit symbol" and (in this example) i have to recall that menu 15 times cause there is no "next" symbol.........

So i ask a "next" button.

Enhancement Request declined ! ;) There's no need for!

start edit symbol,
select symbol,
change parameter (visible on screen)
press "symbol" button again and select next symbol,
change parameter (visible on screen)
press "symbol" button again and select next symbol,
change parameter (visible on screen)
press "symbol" button again and select next symbol,
..

koninkske
10-08-2008, 04:02 AM
Ouch..... :o

clausb
10-08-2008, 04:43 AM
Ouch..... :o

So I'll mark this enhancement request as already done, is that OK with you?

Claus

koninkske
10-09-2008, 01:51 AM
yes no problem :)